1:72 Supermarine (Type 250) "Skylark Mk. I", aircraft "50" of the Irish Army Air Corps (IAAC) No. 1 Squadron; Baldonnel (Dublin), late 1938 (What-if/modified Hasegawa kit) - WiP
The kit and its assembly:
This model was inspired by a drawing, created by Paul Mason in 2013 but re-posted by a modeler at FlickR who was about to build something along its lines, and the ensuing discussion about this fictional aircraft, which appeared like a lean predecessor or the fictional missing link between the Supermarine 224 monoplane with spats and the highly successful, modern Spitfire.
I had already built a similar aircraft a while ago, a retrograded Messerschmitt Bf 109 with spats and an open cockpit (as a fictional Bf 94), but found the idea of a British counterpart very attractive. Even more so because of the particularly elegant lines of this so-called “Type 250”.
At its core, this heavily modified model is a Hasegawa Spitfire Mk. I, chosen because of the kit’s simplicity, good fit and very delicate surface details. Many changes were made, though, partly inspired by the drawing, but also following my own instincts. The biggest changes concern the engine and the wings.
I found the Merlin from the drawing to be too modern for this aircraft, so I transplanted an earlier Kestrel engine from a Matchbox Hawker Fury biplane, together with its ventral radiator that replaced the Spitfire’s cooling system under the wings, together with the older two blade wooden propeller.
The wings were also heavily modified: landing gear wells and radiator openings were filled/closed with 2C putty. Then the wings were cut/bent and re-arranged so that they ended up in an F4U-esque, but very attractive inverted gull wing shape. Not an easy task, though, more PSR involved, but it worked well and looks very natural. Under the wings’ kinks, shortened spats from an Avia B.35 (old KP kit) were added and holes for the new/bigger guns (hollow steel needles) were drilled. As a bonus, the bulges from the original landing gear could now be used as fairings for the early Hispano 60 rounds drum magazines.
The cockpit area was modified, too, into an open configuration. The original Spitfire windscreen was retained (cut away from the OOB single-piece canopy), as well as the entry door, which was cut open for later display. The door itself was replaced with a thinner a piece of 0.5mm styrene sheet. The Spitfire’s spine was completely cut down and re-sculpted with 2C putty. I wanted a low back (similar to the late versions with a bubble canopy), only a short headrest fairing was added behind the pilot’s seat, which received recesses on its flanks for a better field of view for the pilot backwards.
A final change/addition are the machine guns in the flanks that appeared on the Paul Mason drawing. A placement on top of the engine might have been a more logical position and easier to realize with the Hawker Fury’s nose section, but I stuck to the drawing. The fairings were carved from styrene profiles and blended under the kestrel’s exhaust stubs, where the Spitfire fuselage and the Fury engine meet.
1:72 Supermarine (Type 250) "Skylark Mk. I", aircraft "50" of the Irish Army Air Corps (IAAC) No. 1 Squadron; Baldonnel (Dublin), late 1938 (What-if/modified Hasegawa kit) - WiP
The kit and its assembly:
This model was inspired by a drawing, created by Paul Mason in 2013 but re-posted by a modeler at FlickR who was about to build something along its lines, and the ensuing discussion about this fictional aircraft, which appeared like a lean predecessor or the fictional missing link between the Supermarine 224 monoplane with spats and the highly successful, modern Spitfire.
I had already built a similar aircraft a while ago, a retrograded Messerschmitt Bf 109 with spats and an open cockpit (as a fictional Bf 94), but found the idea of a British counterpart very attractive. Even more so because of the particularly elegant lines of this so-called “Type 250”.
At its core, this heavily modified model is a Hasegawa Spitfire Mk. I, chosen because of the kit’s simplicity, good fit and very delicate surface details. Many changes were made, though, partly inspired by the drawing, but also following my own instincts. The biggest changes concern the engine and the wings.
I found the Merlin from the drawing to be too modern for this aircraft, so I transplanted an earlier Kestrel engine from a Matchbox Hawker Fury biplane, together with its ventral radiator that replaced the Spitfire’s cooling system under the wings, together with the older two blade wooden propeller.
The wings were also heavily modified: landing gear wells and radiator openings were filled/closed with 2C putty. Then the wings were cut/bent and re-arranged so that they ended up in an F4U-esque, but very attractive inverted gull wing shape. Not an easy task, though, more PSR involved, but it worked well and looks very natural. Under the wings’ kinks, shortened spats from an Avia B.35 (old KP kit) were added and holes for the new/bigger guns (hollow steel needles) were drilled. As a bonus, the bulges from the original landing gear could now be used as fairings for the early Hispano 60 rounds drum magazines.
The cockpit area was modified, too, into an open configuration. The original Spitfire windscreen was retained (cut away from the OOB single-piece canopy), as well as the entry door, which was cut open for later display. The door itself was replaced with a thinner a piece of 0.5mm styrene sheet. The Spitfire’s spine was completely cut down and re-sculpted with 2C putty. I wanted a low back (similar to the late versions with a bubble canopy), only a short headrest fairing was added behind the pilot’s seat, which received recesses on its flanks for a better field of view for the pilot backwards.
A final change/addition are the machine guns in the flanks that appeared on the Paul Mason drawing. A placement on top of the engine might have been a more logical position and easier to realize with the Hawker Fury’s nose section, but I stuck to the drawing. The fairings were carved from styrene profiles and blended under the kestrel’s exhaust stubs, where the Spitfire fuselage and the Fury engine meet.