new icn messageflickr-free-ic3d pan white

Nikonos II

Detalle de la placa de presión.

 

To change the film must be removed practically all of the camera.

 

First, remove the lens:

Pull out the lens, given a quarter turn to the left and can be removed the lens.

 

Second remove the body:

Using the two levers on the sides of the body, and extracted prying the housing body.

 

Third place the reel:

Once outside the body, lifting the pressure plate of the film and is normally placed.

 

Fourth mount the camera:

After mounting the film is placed in the housing body (be careful with the pressure plate, make sure you entered it in the case), press lightly and mount the lens.

 

762 views
0 faves
0 comments
Taken on April 30, 2012