new icn messageflickr-free-ic3d pan white
Custom PTR91 in Typhoon | by Mitch's Corner
Back to photostream

Custom PTR91 in Typhoon

This is my modified PTR91 (H&K91 Clone) This PTR91 has PSG90 Rails welded on the side for stability. It has a brass deflector welded on to adjust brass ejection to a reasonable 7'. The rifle also has an AR style lower with a Hogue grip, Magpul PRS2, it also has a few other accessories, along with an XS 50 round drum (.308). All done in Kryptek Typhoon. The pattern is designed to retain the black rifle look, but add depth to the rifle. It also has a Trijicon 3.5 ACOG.

 

I also want to thank Drowning Ink Customs for their hard work on this project. They coated over 20 magazines, two drums, all the accessories, two complete lowers and stocks (the Rifle also has a collapsible stock and normal H&K Lower). All the patterns match between parts, which is very hard to do and most shops do not take the time and effort to match pattern lines from piece to piece. It has Duracoat on most of the parts, with Duracoat High Temp coatings on the upper, barrel etc. It also have Cerekote Slick coating on the insides to reduce friction and prevent mucking from repeated firings, along with trigger work from Springfield Trigger Works.

 

The welding was done by John, a US Vet and gunsmith.

 

I want to thank all the individuals that put hours and hours of their time into this project!

718 views
0 faves
0 comments
Taken on June 4, 2013