Safety Inspection Cage. Personal Protection Tunnel
SAFETY INSPECTION CAGE
1. To offer workers and equipment a safe haven
2. A protective measure against injury or loss of life
3. When doing small patchwork the safety cage offers the mason a margin of safety
4. Allows personnel, material and equipment to move safely inside your kiln
5. Used for small patch work
6. There are two standard sizes; custom sizes can also be supplied
7. The frames have legs which are easily adjusted for varying or uneven terrain (adjusts 24" / 61 cm)
8. A lightweight, easily assembled Safety Inspection Cage
9. Designed to be carried along while measuring, removing, and installing refractory
TRANSPORTER
A one man installation option to moving a tunnel system into the kiln

1. Allows tunnel system to be safely assembled from repair spot back to kiln access
2. Fabricated from lightweight aluminum and custom designed to any kiln access
3. Attaches to average universal quick hitch of any skid steer
4. Carrier brackets fit onto end trusses of each individual cage within tunnel system
5. Safety cover protects skid steer driver from falling coating debris and engineered to not impede driver’s vision
PERSONAL PROTECTION TUNNEL
The personal protection tunnel or PPT is designed for worker safety from falling coating that withstands impacts of up to 250lbs (113.5kg) dropped from 18 in (455mm) with 3:1 safety factor. It's fabricated from 6061 NT-6 Aluminum with a steel mesh cover. On request, unassembled can fit through most openings. Each tunnel section is 5 ft (1.5M) long and can be connect together as long or as short as needed. For 5.5m & larger kilns, a collapsible carrier is included to attach to forklift for transportation.

The PPT has shock absorbed columns for increased safety. Shoulder harness is standard for increased stability. Each leg height can be adjusted in accordance with varying surfaces and thickness of a coated kiln. For manual installation, 5.5m kiln, the larger Set up Cage is 8 ft (3M) long & rolls along the spine of the tunnel allowing each tunnel section to be set up under cover. The first cage in the tunnel system is the 5 ft (1.5M) long Inspection Cage. Which can also be used free standing as a portable safety cage for quick inspections and repairs.

1. To offer workers and equipment a safe haven
2. A protective measure against injury or loss of life
3. Light weight aluminum and easy set up
4. Allows personnel, material and equipment to move safely inside your kiln
5. Used for small patch work
6. The frames have legs which are easily adjusted for varying or uneven terrain (adjusts 24" / 61 cm)
31 photos · 1,860 views