new icn messageflickr-free-ic3d pan white
3TrinsRGB+1c Assembling instructions 2016 | by gieskes
Back to photostream

3TrinsRGB+1c Assembling instructions 2016

Assembling instructions for 3trinsRGB+1c kit sold in the year 2016 (not for kits sold earlier then 2016).


Watch this video:


parts list (all other parts have there values marked on the PCB):


C8 222

C1 104


R42 15k

R41 1k

R43 1k


T1 2n3904

T2 2n3904


D1 = 4148

D8 = BAT42

D2 = 3v3

D9 = 3v3


All LED's are short leg into round hole.


The pots can feel sticky from grease, you can whipe the casing of with a dry cloth of you want. only the outside casing is greasy not the legs.


the 10k pot has a flap that need to be cut off, the 20k pots do not have this flap.


After you have fully assembled the device, use a multimeter in the beep setting to check if there are no short circuits, and if the bottom panel is connected to ground.

The ground is connected with a wire from the chassis pin to the top panel, and goes via the top panels bolts to the bottom panel.

0 faves
1 comment
Taken on April 19, 2016