new icn messageflickr-free-ic3d pan white
JURASSIC PARK:ORIGINS 1/10TH VELOCIRAPTOR | by Julien Romeo VFX
Back to photostream

JURASSIC PARK:ORIGINS 1/10TH VELOCIRAPTOR

Here is a 1/10th raptor model.

 

It was printed with a Raise3D N Plus 3D printer.

 

All pieces were printed in 0.04mm layer

Head took 8 hours 46 min for 14.6 gr

Body took 19 hours 22 min for 45.9 gr

Tail took 14 hours 1 min for 17.6 gr

Left leg took 10 hours 45 min for 13.7 gr

Right leg took 10 hours 30 min for 14.4 gr

Arms took 4 hours 59 for 8.3 gr

Killing claws took 2 hours 5 min for 3.9 gr

Hands took 3 hours 52 min for 9.2 gr

 

On movies maquettes are printed to have a better view of what the model will look like on film, they can be used as reference on the set for lighting too.

 

Here are the link and information to the printer we used:

 

N2 Plus Product page:https://www.raise3d.eu/pages/raise3d-n2-plus

www.raise3d.eu/pages/raise3d-n2-plus

www.facebook.com/raise3d

www.twitter.com/raise3d

269 views
0 faves
0 comments
Taken on November 8, 2017