Group Since Jun 18, 2008
Drag to set position!
Share
Sticky
Rubber Grip?
cteteris
1:44am, 27 July 2009
Hey guys,
The rubber grip on my body's coming loose, and expanding, so It can't really be fit back in and glued easily. has that happened to anyone else? Does anyone know if nikon would deal with it under warrenty?
I had it in to the shop a few weeks ago, and they tried glueing it quickly, but they said that because the rubber had expanded, it wasn't really going to work. I've got to take it all the way up to kuala lumpur to get it serviced under warrenty, and I've only got a couple more weeks before it expires.
The rubber grip on my body's coming loose, and expanding, so It can't really be fit back in and glued easily. has that happened to anyone else? Does anyone know if nikon would deal with it under warrenty?
I had it in to the shop a few weeks ago, and they tried glueing it quickly, but they said that because the rubber had expanded, it wasn't really going to work. I've got to take it all the way up to kuala lumpur to get it serviced under warrenty, and I've only got a couple more weeks before it expires.
CollardGreens
14 years ago
In Paris where we have a superb service center they fix all for free. Service tech says it is because the glue used is a "green" glue and not as strong as an environmentally unfriendly chemical... just had a set put on my D200. D700 has not had a problem yet.
I've had many Nikons and have never had this happen. SO although it may be common to some, I think the problem is less than one would think. One thing I do is that I avoid having insect repellants, sunscreens or creams on my hands when I am handling the camera.
cteteris
14 years ago
The bit where my thumb goes, on the right is peeling up all the way around the piece, it'll likely come off completely soon, and I just noticed that the front section that curves around is starting to peel off a little
[ Noktor-Matic ]
14 years ago
you're better off taking it to nikon and getting it reglued
your warranty should cover it.
my D3X's grips have already come off
my D700's are still find thankfully haha
just about every nikon with rubber on it comes off now
my F3's have lifted but haven't come off nikon's ONLY design flaw
your warranty should cover it.
my D3X's grips have already come off
my D700's are still find thankfully haha
just about every nikon with rubber on it comes off now
my F3's have lifted but haven't come off nikon's ONLY design flaw
artworkbyme
14 years ago
I had this same problem. I bought some rubber grip replacements through ebay and they fit perfectly. Comes with adhesives too. I used Goo Gone to take the old sticky stuff off, wiped it clean with rubbing alcohol, let it dry then applied the replacement grips. Be sure to leave it be for several hours so it really adheres to the body before shooting it again.
I read that you can also sand the old rubbers and reapply them with rubber cement.
I read that you can also sand the old rubbers and reapply them with rubber cement.
plausible fuel [deleted]
14 years ago
Funny, if you factor in all the time, money and fuel needed to ship cameras around and manufacture new rubber grips etc. I reckon the "environmentally unfriendly glue " suddenly wins hands down, ecologically , over the "Green Glue".
Actually that's not so funny !
Actually that's not so funny !
CollardGreens
14 years ago
Another piece of information just came to mind. When I had my grips replaced the tech told me that chemicals like DEET (used to ward off biting bugs) would precipitate the breakdown of the glues - so presumably there could be chemicals (soaps?) used everyday that bring on the failure. Just remembered the conversation...
AlphaProject
14 years ago
CollardGreens, can you tell us which nikon service shop you use in Paris? I frequent Paris alot so would be helpful if I need service on my d700. Seems Leica is really popular in France...
CollardGreens
14 years ago
Here's my "peeling grip" story. My D700 is 9 months old, bought in the US (my permanent home) and delivered there when I was home last winter. I live and work full-time outside the US.
For 8 months, the rubber grips were fine. Then all of a sudden, 2 of them lifted off the camera and now are loose over about 3/4 of their area. They'll stick back down if I press on them, but that lasts only for a couple of hours.
I wrote to Nikon USA, told them I couldn't send the camera in for warranty repair because I'm overseas and the cost of shipping would be $350 per DHL. I requested that Nikon simply send me replacement grips (which have the double-sided adhesive attached) and I'd do the replacement.
Nikon's response: spend the money and ship the camera to Melville NY. They wrote that it's not possible for Nikon to send the grip panels to me under any circumstances.
My response is simple: they're nuts.
My next response? Other companies make nice cameras too, even though 40+ years of Nikon use is hard to forget. I'll learn to live without my Nikons over time.
But it's also hard to believe that a company is so inflexible, and cares so little for its customers. That sort of corporate behavior is what led to the bankruptcy of the US auto industry; it's remarkable that Nikon has chosen that sorry example as its role model.
For 8 months, the rubber grips were fine. Then all of a sudden, 2 of them lifted off the camera and now are loose over about 3/4 of their area. They'll stick back down if I press on them, but that lasts only for a couple of hours.
I wrote to Nikon USA, told them I couldn't send the camera in for warranty repair because I'm overseas and the cost of shipping would be $350 per DHL. I requested that Nikon simply send me replacement grips (which have the double-sided adhesive attached) and I'd do the replacement.
Nikon's response: spend the money and ship the camera to Melville NY. They wrote that it's not possible for Nikon to send the grip panels to me under any circumstances.
My response is simple: they're nuts.
My next response? Other companies make nice cameras too, even though 40+ years of Nikon use is hard to forget. I'll learn to live without my Nikons over time.
But it's also hard to believe that a company is so inflexible, and cares so little for its customers. That sort of corporate behavior is what led to the bankruptcy of the US auto industry; it's remarkable that Nikon has chosen that sorry example as its role model.
cteteris
14 years ago
I was too lazy to get up to KL to take it in under warrenty... so checked here, and they'd replace them all for a little less than 100$
I just pulled off the one that was close to falling off and glued it back in myself. good enough fix for now
Joël Kiel Photography
14 years ago
Are you in Europe?
We have a company here in the Netherlands called NikonService.nl
and they sell every replacement part for a lot of camera's and lenses.
I ordered a full grip replacement for my D200 (which i sold).. it is pretty expensive but not impossible ;-)
CollardGreens
14 years ago
I tried to buy the grips for my D200 when they came loose 3+ times. Nikon in Paris was always good about replacement for free (they would for D700 as well). I think they are a little worried that there will be improper sealing made if left to general public - that is what they told me. Another tidbit is that there are certain chemicals - like bug repellant - that react with the glue on the pads and make them come unstuck.
If you are in EU there are lots of service centers that can handle the task. Don''t throw the baby out with the bathwater !
If you are in EU there are lots of service centers that can handle the task. Don''t throw the baby out with the bathwater !
Mine is coming unglued near the "FX" mark (front / lower-right -- when you're facing the camera). Do we have a reasonable DIY option, or must I ship it to Nikon USA? (I could also check with the guys across the street from B&H -- they handle sensor / filter cleaning.)
SavioY
14 years ago
@Ivan - Each distributor has its own turf. That's why I tried to buy in place where I lived, even though that's not the home town.
Perhaps you can have it serviced, paid, and still cheaper than the DHL shipment.
Perhaps you can have it serviced, paid, and still cheaper than the DHL shipment.
trohrer
13 years ago
It was Nikon service that messed up my D700 grips. It looks like they had to remove them to repair the camera. They were never resealed properly. Has anyone tried different glues like Gorilla Glue, Epoxy, Super Glue, Elmers? I dont want to send the camera away again for this trivial service.
Chris Arts
13 years ago
I've gone from Singapore (extremely humid environment) to Arizona (extremely dry environment). With my sweaty palms, just too much for my grip to bear - it's coming off after 2+years of fairly heavy use.. Initial non-warranty estimate to fix (with new grip) $20. Annoying, but seems reasonable compared to most camera repair prices. I will definitely inquire about the glue used to adhere the new grip. Environmentally friendly glue should not be incompetent glue.
Really guys? Take the rubber pad off, wipe off the excess stickiness and go take photos. Believe it or not the camera works great without it and you won't get a blister.
jsv_foto
13 years ago
If you're in the US contact Nikon Parts and order the parts you need:
Nikon Parts Department
Phone: 1-310-414-8107
Fax: 1-310-322-6979
7am – 3pm PST Mon – Fri
(This is the one with the FX logo)
I/F rubber unit #b10061
Double-stick tape #546
Tape#TA-0004
(The grip rubber)
Grip Rubber Unit #b60
Double stick tape #945
Double stick tape #946
Double stick tape #947
Rear rubber unit #b447
Looking at the D700 service manual I see no mention of adhesive on the rubber parts, just the double sided tape. I'm sure they use some kind of adhesive, but unsure what.
Between Grainger and McMaster-Carr you can get pretty much any adhesive that's available on the planet--you can order online from their websites--but just find out what it is you need first before you order.
Nikon Parts Department
Phone: 1-310-414-8107
Fax: 1-310-322-6979
7am – 3pm PST Mon – Fri
(This is the one with the FX logo)
I/F rubber unit #b10061
Double-stick tape #546
Tape#TA-0004
(The grip rubber)
Grip Rubber Unit #b60
Double stick tape #945
Double stick tape #946
Double stick tape #947
Rear rubber unit #b447
Looking at the D700 service manual I see no mention of adhesive on the rubber parts, just the double sided tape. I'm sure they use some kind of adhesive, but unsure what.
Between Grainger and McMaster-Carr you can get pretty much any adhesive that's available on the planet--you can order online from their websites--but just find out what it is you need first before you order.
fotofour
13 years ago
Hi everyone , ive just got off the phone from Nikon UK , and they said i could buy the rubber grips from their service dept direct and fit them myself . My D700 is just out of Warranty and the rubber with the FX logo on it and the thumb grip at the back are coming off . They are only fixed on with double sided tape , so it just means pulling the old ones off and cleaning the residue off and carefully attaching the new rubbers .
Anders Madsen
13 years ago
HI, there.
I've both re-glued, and bought new rubber parts for a D300.
Replacing is the most expensive, but more effective solution.
The rubber absorbs oils, and "sweats" silicone.
This makes it swell, and the glue turns into a sticky mess.Not suited for "new glue"
Upon replacing, one should clean the metal surface with alcohol.
I've both re-glued, and bought new rubber parts for a D300.
Replacing is the most expensive, but more effective solution.
The rubber absorbs oils, and "sweats" silicone.
This makes it swell, and the glue turns into a sticky mess.Not suited for "new glue"
Upon replacing, one should clean the metal surface with alcohol.
Just ordered a set from Nikon parts..they say no double sided tape is used. The grips ship with glue on them.
Jerry
Jerry
kyslyak
13 years ago
Anybody used the ebay rubber grips (non-original)? Any difference to the original ones? Thanks!
The front right grip (the bit with the FX sign) on my D700 is starting to fall off, the other rubbers are okay. This is odd since my hand doesn't really touch that part much. I can see some unbranded replacement ones on eBay for between £10 and £20, just wondered if anyone has had a bad experience with any replacement grips bought off eBay. I don't know how much the genuine Nikon ones are, or even if they are still available to order from Nikon in the UK.
Phone Nikon UK.
I got replacement Nikon rubber for lens focus rings for less than third party ones advertised on eBay.
They do supply parts if it doesn't involve taking the camera apart to do it.
I got replacement Nikon rubber for lens focus rings for less than third party ones advertised on eBay.
They do supply parts if it doesn't involve taking the camera apart to do it.
Did't manage to call Nikon UK, but passed by Fixation in London today, got replacement rubber grip for right thumb area on back of camera and side rubber grip where the FX logo is....for £30! Yikes! Was advised that I might need to apply tiny amount of super glue if it doesn't stick down on its own. Haven't done it yet, but will report my experience when done :-)
www.ebay.co.uk/itm/6-Pcs-Grip-Rubber-Set-Combo-with-3M-Ad...
has to be worth a try... but go with a decent adhesive, as Cube says
has to be worth a try... but go with a decent adhesive, as Cube says
CircadianReflections Photography
Posted 8 years ago. Edited by CircadianReflections Photography (member) 8 years ago
I have experienced this problem with my D700, The Rubber just under my AF- ON button was pulling out every time I used the AF-ON button; it would catch the corner with my thumb and pull away from the camera housing.
Rather than send it in (it wasn't in warranty by this time) I purchased from the Auto Parts Store "Indian Head Gasket Shellac Compound" and applied a small amount around the piece of grip that was coming loose.
This stuff doesn't dry like normal glue; it stays tacky, but it holds the grip in place. It's AMAZING! The 2 fl oz. bottle cost about $4 USD. Thank you and Hat Tip to
for the tip!
It's my understanding that the grips can't be permanent because all parts need to be able to come apart for internal repairs.
It's been 17 months since I fixed it and the grip is solid- it doesn't move.
If the grip is really stretched and doesn't fit the space it might be best to get the replacement grips though.
Rather than send it in (it wasn't in warranty by this time) I purchased from the Auto Parts Store "Indian Head Gasket Shellac Compound" and applied a small amount around the piece of grip that was coming loose.
This stuff doesn't dry like normal glue; it stays tacky, but it holds the grip in place. It's AMAZING! The 2 fl oz. bottle cost about $4 USD. Thank you and Hat Tip to
It's my understanding that the grips can't be permanent because all parts need to be able to come apart for internal repairs.
It's been 17 months since I fixed it and the grip is solid- it doesn't move.
If the grip is really stretched and doesn't fit the space it might be best to get the replacement grips though.
it's not that the rubber stretches, it swells up because it absorbs oils from your skin... same with the D300.
not that this actually matters when it's falling off :)
not that this actually matters when it's falling off :)
sawyerspadre
8 years ago
I just bought new rubber, for grip, bottom and back, with the glue from Nikon USA for about 35 USD and they come with the sticky tape on them.
They are currently out of stock on the IF cover, which is on the front right, as you are looking at front of camera, near the AF selector. It's the rubber with the FX logo. Spoke to Nikon and they expect these back in.
They are currently out of stock on the IF cover, which is on the front right, as you are looking at front of camera, near the AF selector. It's the rubber with the FX logo. Spoke to Nikon and they expect these back in.
The only thing that is mildly loose on my cameras are the ten pin connector covers. I put it down to the way I grip the camera. I would have preferred screw caps.
Mine's come off too - about half way already.
Was tempted to try
CircadianReflections Photography solution but in the end decided to go for a new one. Should be here sometimes next week.
EDIT: it arrived, ripped the old one off fully, cleaned the residue off and applied the new one (it has glue already applied). Realized that on the area that had separated, the glue was still attached to the metal but had completely released from the rubber. Peeling the still attached portion back resulted in a release of the glue from the metal not the rubber. Had I realized that earlier, then I might just have applied some rubber cement.
Was tempted to try
EDIT: it arrived, ripped the old one off fully, cleaned the residue off and applied the new one (it has glue already applied). Realized that on the area that had separated, the glue was still attached to the metal but had completely released from the rubber. Peeling the still attached portion back resulted in a release of the glue from the metal not the rubber. Had I realized that earlier, then I might just have applied some rubber cement.