southof290's photostream  

here's a before photo from...

All rights reserved

Uploaded on Feb 8, 2011  |  Map

4 comments

We only have one tiny hall closet that barely holds the vacuum cleaner and some towels. This is my...

All rights reserved

Uploaded on Feb 8, 2011  |  Map

2 notes / 0 comments

Standing in the living room looking towards the dining room and kitchen

All rights reserved

Uploaded on Feb 8, 2011  |  Map

2 notes / 0 comments

here's the same angle before www.flickr.com/photos/sou thof290/432084157/in/set-7215760 ...

All rights reserved

Uploaded on Jul 12, 2010  |  Map

3 comments

i cut/lowered the back of the drawer to give clearance for the computer wires and so the power strip cable could move with the drawer

All rights reserved

Uploaded on Jul 12, 2010  |  Map

0 comments

the top drawer is a charging station

All rights reserved

Uploaded on Jul 12, 2010  |  Map

0 comments

All rights reserved

Uploaded on Jul 12, 2010  |  Map

0 comments

The right hutch i made with plywood. It's joined with biscuits and screws.

All rights reserved

Uploaded on Jul 12, 2010  |  Map

0 comments

The left hutch is made from an old pine bookcase. I cut about a foot off the bottom.

All rights reserved

Uploaded on Jul 12, 2010  |  Map

0 comments

All rights reserved

Uploaded on Jul 12, 2010  |  Map

1 note / 0 comments

been working steady on this for months, still need to finish the drying shelf, and some caulking and...

All rights reserved

Uploaded on Jan 12, 2010  |  Map

2 notes / 0 comments

Here's the ebay ad--- Two 20th Century Modern Chrome Track Lights Swivelier. They work fine. We sold...

All rights reserved

Uploaded on Nov 5, 2009  |  Map

0 comments

All rights reserved

Uploaded on Nov 4, 2009  |  Map

4 comments

I ran a thick bead of 100% silicone under the rim of the sink, set the sink in place. Then ran another...

All rights reserved

Uploaded on Nov 4, 2009  |  Map

4 comments

I spread adhesive evenly over the metal, then we lowered the top back into place and left it clamped overnight.

All rights reserved

Uploaded on Nov 4, 2009  |  Map

0 comments

The guys at Custom Sheet Metal did a beautiful job. www.customsheetmetalinc.com /index.html

All rights reserved

Uploaded on Nov 1, 2009  |  Map

0 comments

I picked up the top from the metal shop. Kim had to help me lift the plywood away from the stainless....

All rights reserved

Uploaded on Nov 1, 2009  |  Map

0 comments

The sink hole, and faucet holes, are done. Here's a last dryfit before I take the counter to the metal shop to be wrapped in stainless!

All rights reserved

Uploaded on Oct 27, 2009  |  Map

0 comments