|
redbarnboats' photostream |
|
Lauras Sea Trails 044
Mr. Duckworks, Chuck Lienweber taking Laura for another out and back.
All rights reserved
Uploaded on Oct 14, 2006
Lauras Sea Trails 042
Well known Seattle based yacht designer taking Laura for a spin.
All rights reserved
Uploaded on Oct 14, 2006
Lauras Sea Trails 035
Laura_120
FirstDay7
Another photo showing the balanced trim with the seat in the forward position.
All rights reserved
Uploaded on Oct 14, 2006
FirstDay6
Rowing with a friend to try out the moveable center seat.
All rights reserved
Uploaded on Oct 14, 2006
Laura112
Checking the placement of the mast step. The hull has been leveled side to side and sits on it's waterline.
All rights reserved
Uploaded on Oct 13, 2006
Laura85
Applying a combination mix of SilverTip epoxy and System Three QuickFair, fairing compound to fill...
All rights reserved
Uploaded on Oct 13, 2006
Laura81
Moving the epoxy around the glass cloth with a rubber edged squeegee.
All rights reserved
Uploaded on Oct 13, 2006
Laura79
Pouring on System Three SilverTip epoxy to wet out the glass cloth.
All rights reserved
Uploaded on Oct 13, 2006
Laura78
Smoothing out the wrinkles in the glass cloth. Do this over a two day period and you can stretch and...
All rights reserved
Uploaded on Oct 13, 2006
Laura76
Applying masking tape along the hull where the fiberglass cloth will be trimmed at.
All rights reserved
Uploaded on Oct 13, 2006
Laura72
Sanding the taped seams getting ready to roll out the cloth.
All rights reserved
Uploaded on Oct 13, 2006
Laura69
Mixing up fairing compound to smooth the tape edges. A mixture of epoxy and System Three QuickFair.
All rights reserved
Uploaded on Oct 13, 2006
