|
watercache.com's photostream
|
|
Rainwater pillow full after first rain
One of the rainwater pillows that we installed is full after the first rain event of 1.5 to...
All rights reserved
Uploaded on Oct 13, 2011
Rainwater pillow after first rain
One of the rainwater pillows that we installed is full after the first rain event of 1.5 to...
All rights reserved
Uploaded on Oct 12, 2011
Pipe manifold into pump system
The rainwater pillows have been installed in series so that they share volume. This pump...
All rights reserved
Uploaded on Oct 12, 2011
Outlet pipe from rainwater pillow
This shows the outlet pipe and valves on the rainwater pillow before any rain has filled...
All rights reserved
Uploaded on Oct 12, 2011
Gutters and downspouts for collection
Some of the gutter work and downspouts that bring rainwater down from the 2nd story...
All rights reserved
Uploaded on Oct 12, 2011
Pipe routing with hanging straps
Rainwater collection pipes were installed into the crawlspace from the downspouts. For...
All rights reserved
Uploaded on Oct 12, 2011
Inlet pipe attachment to rainwater pillow
This picture shows the flexible connection between the rainwater collection piping and...
All rights reserved
Uploaded on Oct 12, 2011
Downspouts routing into crawlspace
A small bit of painted PVC was installed at the bottom of the downspout in order to provide...
All rights reserved
Uploaded on Oct 12, 2011
Pipe routing into crawlspace
Rainwater collection pipes were installed into the crawlspace from the downspouts. For...
All rights reserved
Uploaded on Oct 12, 2011
Complete rainwater collection system
Completed 2,500 gallon polyethylene tank with cedar wrap and metal top. For...
All rights reserved
Uploaded on Jul 10, 2009
Complete rainwater harvesting system
Completed 2,500 gallon polyethylene tank with cedar wrap and metal top. For...
All rights reserved
Uploaded on Jul 10, 2009
Downspout Completed 2,500 gallon poly tank with cedar wrap and metal topwith leaf filter and first-flush device
This system setup is a "dry" system where the collection pipes dry out after every...
All rights reserved
Uploaded on Jul 10, 2009
Cedar wrapped with top support for roof
We did not want to support the metal roof on the cedar planks so we created a...
All rights reserved
Uploaded on Jul 10, 2009
Galvanized metal strapping detail
This allowed us to cinch down the metal straps and secure the cedar planks. For...
All rights reserved
Uploaded on Jul 10, 2009
Cedar wrapped tank ready for metal straps
This picture shows the placement of the rainwater harvesting cistern at the top of the...
All rights reserved
Uploaded on May 22, 2009
Installing cedar plank around poly tank
Here we are installing the cedar planks around the tank. Once finished, we will install...
All rights reserved
Uploaded on May 22, 2009
Installing tar paper around poly tank
We wrap the tank with tar paper because these tanks will sweat with condensation. Without...
All rights reserved
Uploaded on May 22, 2009
2,500 gallon poly tank set in place
We installed this rainwater collection cistern at the top of this lot. It will collect...
All rights reserved
Uploaded on May 22, 2009
Rainwater pillow
Cedar wrapped rainwater...
Portfolio
Commercial-proj ects
Rainwater storage
Galvanized metal
Polyethylene
Corrugated metal
Fiberglass
Pioneer-tanks
