|
onehowl's photostream |
|
Cradle top completed
This was actually done first, but Laptop Mount Version 1.0 did not work up to standards. Remember this is...
All rights reserved
Uploaded on Apr 7, 2008
Test fit
This was actually done first, but Laptop Mount Version 1.0 did not work up to standards. Remember this is...
All rights reserved
Uploaded on Apr 7, 2008
Grinding off for access to jacks
This was actually done first, but Laptop Mount Version 1.0 did not work up to standards. Remember this is...
All rights reserved
Uploaded on Apr 7, 2008
Trimming off the excess that was sticking out of the back
This was actually done first, but Laptop Mount Version 1.0 did not work up to standards. Remember this is...
All rights reserved
Uploaded on Apr 7, 2008
Cut of excess leaving a lip that does not protrude above laptop
This was actually done first, but Laptop Mount Version 1.0 did not work up to standards. Remember this is...
All rights reserved
Uploaded on Apr 7, 2008
Check the angle of bend
This was actually done first, but Laptop Mount Version 1.0 did not work up to standards. Remember this is...
All rights reserved
Uploaded on Apr 7, 2008
Bend it with a torch, I am using MAPP gas. It's way overkill, but what I had on hand.
This was actually done first, but Laptop Mount Version 1.0 did not work up to standards. Remember this is...
All rights reserved
Uploaded on Apr 7, 2008
Cradle top. Start with an old UV cover for a PC that you never used.
This was actually done first, but Laptop Mount Version 1.0 did not work up to standards. Remember this is...
All rights reserved
Uploaded on Apr 7, 2008
Permanant Mount To Go Under Seat Bracket
Hey, no jokes on what it looks like. Remember, this is all scrap parts. This was some leftover metal from...
All rights reserved
Uploaded on Apr 7, 2008
Permanant Mount To Go Under Seat Bracket
Hey, no jokes on what it looks like. Remember, this is all scrap parts. This was some leftover metal from...
All rights reserved
Uploaded on Apr 7, 2008
Articulating Arm (shown vertical here)
I started with the articulating arm. It will function in the horizontal position when it is installed....
All rights reserved
Uploaded on Apr 7, 2008
Articulating Arm (shown vertical here)
I started with the articulating arm. It will function in the horizontal position when it is installed....
All rights reserved
Uploaded on Apr 7, 2008
Articulating Arm (shown vertical here)
I started with the articulating arm. It will function in the horizontal position when it is installed....
All rights reserved
Uploaded on Apr 7, 2008
Jotto Desk "Tactical" position
This is what I wanted but could not afford the $300 it costs. Even then, they don't make one for a Jeep....
All rights reserved
Uploaded on Apr 7, 2008
Jotto Desk
This is what I wanted but could not afford the $300 it costs. Even then, they don't make one for a Jeep....
All rights reserved
Uploaded on Apr 7, 2008
best tattoo
New Years in Florida
Back In The Day...
God Bless America
Brewing Beer
Friends and Neighbors
Projects I'll probably...
Aikido
Kids
Photo Project
Japan Trip 2005
» More Sets
