new icn messageflickr-free-ic3d pan white
Serial CV Interface - Installed | by Nick Ames
Back to photostream

Serial CV Interface - Installed

The board is small enough to fit inside a Korg Monotron. I used a 3.5mm jack to get the control signal in. The output is wired to the junction of R5 and the ribbon controller, and power comes from an unpopulated decoupling capacitor in the middle of the board.

 

www.fetchmodus.org/projects/serialcv/

1,641 views
0 faves
0 comments
Taken on July 27, 2013