|
minolta42's photostream |
|
filed
Close up of the protruding ridge on the edge of adapter (side facing camera), which I leveled out.
All rights reserved
Uploaded on Feb 3, 2007
front
Flat front surface. This adapter also have correct thickness. No infinity focus problem observed.
All rights reserved
Uploaded on Aug 30, 2006
aperture lever slot
Long enough clearance for camera aperture lever. If it is too short, sometimes it could catch the...
All rights reserved
Uploaded on Aug 30, 2006
stop screw
Stop screw in place. Give proper safety measure when mounting adapted lens.
All rights reserved
Uploaded on Aug 30, 2006
lens lock pin slot
Proper lens lock pin slot. I always prefer thorough slot, give more positive and observable locking...
All rights reserved
Uploaded on Aug 30, 2006
comparison of adapter and AF lens mount
Diameter comparison of different m42 adapter with minolta AF lens mount. Excess 1mm on the m42 adapter...
All rights reserved
Uploaded on Aug 16, 2006
no need for extraction key
Old hama adapter came with extraction key. it is same design (same product I think) as the bower adapter...
All rights reserved
Uploaded on Aug 16, 2006
modifying adapter thickness
To eliminate the friction which causing difficulty to mount/unmount the adapter, I have flattened out...
All rights reserved
Uploaded on Aug 16, 2006
leveled ridge on outer edge
Bronze colored edge indicating the former protruding ridge which I have leveled out.
All rights reserved
Uploaded on Aug 16, 2006
missing stop screw
Some flaw on this adapter: - missing stop screw. - usual protruding ridge at the edge
All rights reserved
Uploaded on Aug 16, 2006
stop screw and leveled ridge on outer edge
Stop screw, it is a safety measure to prevent overturning the lens in wrong direction incase of...
All rights reserved
Uploaded on Aug 16, 2006
simple cross section
Simple cross section of common m42 to A-mount adapter. Adapter thickness along C is important to...
All rights reserved
Uploaded on Aug 16, 2006
lens mount height difference
The lens mount height from camera front surface is different between old analog A-mount SLR and...
All rights reserved
Uploaded on Aug 16, 2006
