|
K3ZM's photostream
|
|
tower 200 bases 002
tower 200 bases 001
tower 200 bases 004
tower 200 bases 006
What M will use to pull up the tower sections. A big eye bolt, some blocks, lots of rope, and the Volvo!
All rights reserved
Uploaded on Jan 26, 2010
tower 200 bases 003
tower 200 bases 008
tower 200 bases 007
These guys, father and son, made this project happen in a day!
All rights reserved
Uploaded on Jan 26, 2010
radio 014
One of the boxes for a magnetic loop. Note the adjusting screw for the trimmer capacitor, below the female F connector.
All rights reserved
Uploaded on Jan 25, 2010
radio 012
The modified radio switching box that helped net at least three Top Tens for K2DM. A footswitch controls...
All rights reserved
Uploaded on Jan 25, 2010
radio 009
The base of one of the coax loop listening antennas. The box contains the trimmer capacitor.
All rights reserved
Uploaded on Jan 25, 2010
radio 008
A coax loop mounted about 900 feet from the XMIT antenna, broadside to it. Faces NW and SE.
All rights reserved
Uploaded on Jan 25, 2010
radio 007
The base of a shortened listening vertical for 160 meters. The loading coil is wound on the short piece of...
All rights reserved
Uploaded on Jan 25, 2010
radio 006
radio 005
Just for the heck of it, I placed a DXE Receive Feedline Current Choke about 30 feet before the coax loop to...
All rights reserved
Uploaded on Jan 25, 2010
radio 004
Preparing the flooded RG-6 coax for a snap-on connector, in the field. Visible is an Ameritron RCS-4 which...
All rights reserved
Uploaded on Jan 25, 2010
radio 001
This inductor measures 31uH and causes the shortened vertical to resonate on 1825kc at impedance of 12 ohms...
All rights reserved
Uploaded on Jan 25, 2010
160m Four-Square
Views from the Big Tower
40m Beam on the Big Tower
Heron SteppIR 2
Heron Haven Renovation
Towers
