hsp_flycaster's photostream

Screwing in the hatches to finish the job. All done. This hull is for sale!

All rights reserved

Uploaded on Dec 29, 2007

0 comments

Adding goo to seal the 4" hatches frame to the hull.

All rights reserved

Uploaded on Dec 29, 2007

0 comments

Using a cheap foam roller cut into 3" sections to even out the epoxy used to wet out the glass tape and coat the flat sections of the air tanks.

All rights reserved

Uploaded on Dec 29, 2007

0 comments

Using a popcicle stick to leave a rounded surface. I then use a 3" putty knife to scrape away...

All rights reserved

Uploaded on Dec 29, 2007

0 comments

Adding a wood filled fillet to the seams. I am using System Three's EZ-Fillet that I have put in a plastic bag like frosting a cake.

All rights reserved

Uploaded on Dec 29, 2007

0 comments

You can see the blue and cream parts of the epoxy mixing in the nozzle.

All rights reserved

Uploaded on Dec 29, 2007

0 comments

Using System Three's GelMagic to epoxy the air tank to the hull. The two part epoxy mixes in the nozzle.

All rights reserved

Uploaded on Dec 29, 2007

0 comments

I usually don't paint the inside of air chambers, and just leave them with two coats of epoxy. But I had the paint and what the, can't hurt.

All rights reserved

Uploaded on Dec 29, 2007

0 comments

Checking the fit of the 4" quarter turn hatch.

All rights reserved

Uploaded on Dec 29, 2007

0 comments

A final check of the plywood panels before I "jump stitch" them together and fair in the...

All rights reserved

Uploaded on Dec 5, 2007

0 comments

The port side chamber. This is the "stitching" part of stitch and glue. The 1/4" bolts...

All rights reserved

Uploaded on Dec 5, 2007

0 comments

Checking the space for a group 24 battery box. Made cardboard mockups to get an idea of size.

All rights reserved

Uploaded on Dec 5, 2007

0 comments

End of Launch party and on the dolly for home. Plans are available at www.duckworksmagazine.com ...

All rights reserved

Uploaded on Apr 14, 2007

0 comments

Balance of hull when I'm facing forward.

All rights reserved

Uploaded on Apr 14, 2007

0 comments

Balances nicely while rowing and flattens out when standing and casting.

All rights reserved

Uploaded on Apr 14, 2007

0 comments

Damn. why didn't I bring my rod.

All rights reserved

Uploaded on Apr 14, 2007

0 comments

Still plenty of waterline for more weight.

All rights reserved

Uploaded on Apr 14, 2007

0 comments

Bob also said it's more stable. He's standing on the edge.

All rights reserved

Uploaded on Apr 14, 2007

0 comments