|
drmcetta's photostream |
|
Another view of the lifting tackle
The Dinghy Tackel used as a lifting sling
4X4 laid over the davits supports the drive via the dinghy tackle
All rights reserved
Uploaded on Apr 9, 2007
Reassembled Capsule
All in place except for the cotter pin on the shaft. The gear was the only part I retained from the old unit
All rights reserved
Uploaded on Mar 19, 2007
New Capsule and Spacer
Here's the spacer that takes the pressure off the bearing when you tighted it. The beveled side matches the bevel on the CV joint
All rights reserved
Uploaded on Mar 19, 2007
The New Capsule and Bearing
Sillette sent the whole assembly already pressed into the housing
All rights reserved
Uploaded on Mar 19, 2007
The Old and New Bearings Side by Side
Here's a view of the old (left) and new (right) bearings. The old bearing is larger diameter, but the new is a stronger design
All rights reserved
Uploaded on Mar 19, 2007
The Capsule with the CV Joint Removed
Nut is off, CV joint shaft is out. The bad bearing is press fitted to the other side of this gear. The...
All rights reserved
Uploaded on Mar 19, 2007
Top View with the Cover Plate Off
Here's what it looked like with the top open. I had to drill out the screws at 12 and 9 o'clock. I used...
All rights reserved
Uploaded on Mar 19, 2007
The Original Capsule
It was necessary to remove the nut to get the gear off since I was reusing it. It just wouldn't come...
All rights reserved
Uploaded on Mar 19, 2007
CV Joint Capsule Reassembled
Andalucia
Biarritz
City Island Winter
Costa Rica
Tortola 2006
Venizia
Sillette Repairs
