|
Red and brown
|
Brown prairie grasses 2
|
All rights reserved
Uploaded on Nov 13, 2009
0 comments
|
All rights reserved
Uploaded on Nov 13, 2009
0 comments
|
|
Brown prairie grasses 1
|
Mighty Mouse Repair II - 18
|
All rights reserved
Uploaded on Nov 13, 2009
0 comments
|
This is a sketch I made of the
roller arrangement before I
removed the white cage. The
rollers have ...
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|
|
Mighty Mouse Repair II - 17
|
Mighty Mouse Repair II - 16
|
All the parts are clean and
reassembled. Screw it back in
place, snap the top and bottom
back ...
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|
So instead, I put the rollers
and the ball into the black part
and snapped the white cage down
on ...
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|
|
Mighty Mouse Repair II - 15
|
Mighty Mouse Repair II - 14
|
At first, I though I could
reassemble things by putting the
cage on the table and snapping
the black ...
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|
For orientation when
reassembling: the long tab on
the white cage snaps in the side
with the ribbon ...
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|
|
Mighty Mouse Repair II - 13
|
Mighty Mouse Repair II - 12
|
Here's some of the gunk that
forced me to do this repair.
Also cleaned out with isopropyl
alcohol.
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|
I held the rollers like this
while cleaning them with
isopropyl alcohol. The black
part at the end ...
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|
|
Mighty Mouse Repair II - 11
|
Mighty Mouse Repair II - 10
|
Now you can see all four
rollers.
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|
Cage and ball are out. Two of
the rollers are still in place;
the other two popped out with
the ...
All rights reserved
Uploaded on Nov 10, 2009
2 notes /
0 comments
|
|
Mighty Mouse Repair II - 09
|
Mighty Mouse Repair II - 08
|
Here's the ball in its cage.
Make note of the orientation of
the four rollers before you
remove the ...
All rights reserved
Uploaded on Nov 10, 2009
1 note /
0 comments
|
Remove the screws that hold the
black part to the shell.
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|
|
Mighty Mouse Repair II - 07
|
Mighty Mouse Repair II - 06
|
Now you can see where the
trackball is kept.
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|
Another screwdriver twist
separates the hinge post from
the socket.
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|
|
Mighty Mouse Repair II - 05
|
Mighty Mouse Repair II - 04
|
The top and bottom are still
held together by hinge-like
parts at the rear.
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|
With both front tabs popped, the
two halves of the mouse start to
separate.
All rights reserved
Uploaded on Nov 10, 2009
0 comments
|