Drill

Drill

Workaround: drill holes!

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

0 comments

Ponder Hacksaw

Ponder Hacksaw

Mark. Bolt brackets together. Clamp to 2x4. Realise hacksaws don't cut in circles very well.

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

1 note / 0 comments

Check; Groan

Check; Groan

After more drilling, I checked the brackets against the stepper… and realised that the mounting face had a...

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

1 note / 0 comments

Peg

Peg

The upper bracket wandered while I drilled, so I dropped an M3 bolt into the hole to hold things steady.

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

1 note / 0 comments

Clamp; Drill One

Clamp; Drill One

After measuring and cutting, I clamped the L brackets to a spare 2x4 and drilled a hole.

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

1 note / 0 comments

Finished #2

Finished #2

All bolted together, with a clearer view of the L brackets. The gears are from thing:5795.

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

3 notes / 0 comments

Finished #1

Finished #1

All bolted together! The extruder is thing:6458 with the extended plate hacksawed off. Handily, it has holes...

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

0 comments

Grind; Check Yet Again

Grind; Check Yet Again

This time, I just grabbed a file. It would have taken forever to do the big hole, but it enlarged this hole...

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

0 comments

Grind; Check Again

Grind; Check Again

A little grinding work, and… no. Not quite. I hadn't bolted the extruder plate on when first marking the hole...

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

0 comments

Assemble; Check

Assemble; Check

Bolting the stepper to the brackets revealed that I'd failed to leave enough room for the 6mm bolt through...

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

0 comments

Check Fit After Grinding

Check Fit After Grinding

Et voilà!

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

0 comments

Check Fit

Check Fit

The hole wasn't quite big enough, so I grabbed the cordless Dremel. The grinding stones didn't do much, so...

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

0 comments

Twist and Break

Twist and Break

A pair of pliers, a minute flat, and I had a nice hole.

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

0 comments

Drill More

Drill More

I found I could drill holes between the other holes — even if the holes were closer together than a drill...

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

0 comments

Cut Slots

Cut Slots

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Aug 13, 2011

0 comments

Loot

Loot

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Jul 4, 2011

0 comments

Duck

Duck

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Jul 4, 2011

0 comments

More Parts

More Parts

Anyone can see this photo AttributionNoncommercialNo Derivative Works Some rights reserved

Uploaded on Jul 4, 2011

0 comments

← prev 1 2 3 4 5 6 7 ... 47 48
(852 items)
Subscribe to a feed of stuff on this page... Subscribe to garthk's photostream – Latest | geoFeed | KML