|
CDTlog's photostream
|
|
Greg, Beating a Stick of Solder
Greg using a hammer at the anvil to thin out a stick of solder, ready to bond the ends of his tone ring.
All rights reserved
Uploaded on Jan 30, 2012
Patrick, Turning His Rim
Patrick turing the inner surface of his rim at the wood lathe.
All rights reserved
Uploaded on Jan 30, 2012
Patrick, Turning His Rim
Patrick turing the inner surface of his rim at the wood lathe.
All rights reserved
Uploaded on Jan 30, 2012
Anna, Carving the Neck
Anna is using a rasp to carve the curved cross section of the neck of her banjo.
All rights reserved
Uploaded on Jan 30, 2012
Andrew, Filing His Tone Ring
Having soldered the ends together at the brazing hearth, Andrew is cleaning up the joint with a file.
All rights reserved
Uploaded on Jan 30, 2012
Anna, Carving the Neck
Anna is using a rasp to carve the curved cross section of the neck of her banjo.
All rights reserved
Uploaded on Jan 30, 2012
Andrew, Sawing Fret Drafts
Andrew has the neck of his banjo in a jig and is using a fret saw.
All rights reserved
Uploaded on Jan 30, 2012
Anna's Neck
The neck, now ready for final shaping, using a rasp and files.
All rights reserved
Uploaded on Jan 28, 2012
Anna's Neck
The neck, now ready for final shaping, using a rasp and files.
All rights reserved
Uploaded on Jan 28, 2012
Anna's Neck
The neck, now ready for final shaping, using a rasp and files.
All rights reserved
Uploaded on Jan 28, 2012
Anna's Neck
The neck, now ready for final shaping, using a rasp and files.
All rights reserved
Uploaded on Jan 28, 2012
Laura, Filing Her Tone Ring
Laura, Filing Her Tone Ring
Gluing Up a Rim
This rim will become part of the sound box of a ukulele.
All rights reserved
Uploaded on Jan 26, 2012
Laura, Sawing Her Tone Ring to Length
The ring has been formed on the ring roller and the overlapping ends are being cut at an angle, ready for soldering.
All rights reserved
Uploaded on Jan 26, 2012
Steven, Gluing His Banjo's Neck
At the stage photographed, Steven had sawn the fret drafts and was gluing additional timber on to the neck.
All rights reserved
Uploaded on Jan 26, 2012
Stuart, Marking Out His Banjo's Neck
Marking out the neck, ready for cutting the profile where it will pass through the rim / pot.
All rights reserved
Uploaded on Jan 26, 2012
PCS Banjo
Duke of Edinburgh's Award -...
'16 Plus' Banjo Set 3
Visit to Meso, December 2011
Banjo Prototype No. 1
Mr Myles' Guitar
'16 Plus' Banjos - set 2
Banjo Prototype No. 2
'16 Plus' banjos, set 1
Model Aeroplane - Completed
» More Sets
