|
AdrianSmith's photostream
|
|
Zappa plays Zappa - Warwick Arts Centre 26/11/2011
Orange County Cup 2011
Dylan Smith, Matthew Blood, Ben Smith, Hannah Krasner, Darcey Roe, Lara Hill
All rights reserved
Uploaded on Jul 18, 2011
P1030981.JPG
all covered - nothing too flash as I just used what film I had. Very difficult to cover the vtails...
All rights reserved
Uploaded on Feb 15, 2011
P1030980.JPG
elevator servo - getting the linkage right at the back was very tricky, luckily I guess I wont need those elevators to move much!
All rights reserved
Uploaded on Feb 15, 2011
P1030974.JPG
P1030973.JPG
P1030972.JPG
the snake is made of piano wire and I soldered on a Y piece to operate the vtails
All rights reserved
Uploaded on Feb 6, 2011
P1030971.JPG
the plate to hold the captive nut for the wing retaining bolt
All rights reserved
Uploaded on Feb 6, 2011
P1030970.JPG
added a thin ply brace for the wing retaining bolt so that it doesn't indent the balsa, might be overkill?
All rights reserved
Uploaded on Feb 6, 2011
P1030968.JPG
glued on some expensive nylon widgets to the torque rods
All rights reserved
Uploaded on Feb 6, 2011
P1030960.JPG
a temporary brace glued across the top in front of the tail. quite tricky to get the tail lined up... only time will tell!
All rights reserved
Uploaded on Jan 16, 2011
P1030959.JPG
v-tail sections just traced and cut out. I decided to join them using a sanded piece of rectangular...
All rights reserved
Uploaded on Jan 16, 2011
P1030958.JPG
P1030957.JPG
ailerons took a lot of sanding to reduce the "standard" section to something useful
All rights reserved
Uploaded on Jan 16, 2011
P1030956.JPG
back to the wing and now adding the torque rods and fixed centre trailing edges
All rights reserved
Uploaded on Jan 16, 2011
P1030955.JPG
rear end needs more work, but ok for now until I work out the tail controls
All rights reserved
Uploaded on Jan 16, 2011
