You aren't signed in     Sign In    Help
Aaron Olaf · Sets
[?]

CDI Installed

The Yamaha Jog ZR is RPM-limited by the CDI unit. This is a step-by-step English HOWTO on upgrading this unit on the 2006 ZR.

DISCLAIMER: All I have done here is write up the process in English for those who may not read Japanese or not read Japanese well enough to be convenient. If you follow my directions and break your scooter, I assume no responsibility whatsoever. When modifying a motor vehicle, keep in mind that you are doing so of your own volition and any problems you have are your own.

29 photos | 1,967 views

items are from 15 Oct 2006.

Before Beginning by Aaron Olaf
Front Chromed Phillips Screws by Aaron Olaf
Rear Phillips Screws by Aaron Olaf
Rear Torx Screws by Aaron Olaf
Daytona Torx Kit by Aaron Olaf
Torx Wrench/Driver by Aaron Olaf
Phillips Cowling Screws by Aaron Olaf
Torx Cowling Screws by Aaron Olaf
Push Rivet 1 by Aaron Olaf
Push Rivet 2 by Aaron Olaf
Push Rivet Removed by Aaron Olaf
Front Cowling Removed by Aaron Olaf
Front of Scooter Opened by Aaron Olaf
Front Electronics Compartment by Aaron Olaf
Stock CDI Mounting by Aaron Olaf
Stock Yamaha CDI Removed by Aaron Olaf
CDI Cavity by Aaron Olaf
CDI Plug by Aaron Olaf
Stock ZR CDI by Aaron Olaf
CF Posh Super Battle Professional by Aaron Olaf
Default Timing Map by Aaron Olaf
Timing Maps by Aaron Olaf
CDI Mounting 1 by Aaron Olaf
CDI Mounting 2 by Aaron Olaf
CDI Installed by Aaron Olaf
CDI with New Setting by Aaron Olaf
Push Rivet Primed for Insertion by Aaron Olaf
Problematic Clip by Aaron Olaf
Finished by Aaron Olaf

Subscribe to a feed of stuff on this page... Feed – Subscribe to the set "HOWTO: Upgrade the CDI on a 2006 Yamaha Jog ZR"