|
bobbymikewalters' photostream |
|
Arc Master Sander
Variable radii (concave or convex) sander. Uses a wet/dry sanding mesh. Suitable for plaster, drywall, wood (hard, soft and ply).
Some rights reserved
Uploaded on Jun 15, 2009
Stained
When the stain is dry I'll put a coat of water based poly on it to seal it. I'll probably sand that coat when dry and do another coat after that.
Some rights reserved
Uploaded on Feb 1, 2008
Finished
I made an extra shelf for my friend because there was room in the box.
Some rights reserved
Uploaded on Feb 1, 2008
Drill!
Gang drill them to save time. Make sure you stack them on top of a piece of wood to prevent tear out.
Some rights reserved
Uploaded on Feb 1, 2008
Sanding disc shelves.
I used some thin filches of cherry for this set. 1/8" plywood works great too (and is probably...
Some rights reserved
Uploaded on Feb 1, 2008
Box side
You can butt joint these, or miter them. I chose to do a little of both. Cut your dados for the the...
Some rights reserved
Uploaded on Feb 1, 2008
All the parts!
Dimensions are not critical. Use what you have lying around. I'm trying to do a nice job on this one...
Some rights reserved
Uploaded on Feb 1, 2008
Original sanding disc shelf
I originally used three dowels per shelf. It was definitely overkill. You only need one per shelf.
Some rights reserved
Uploaded on Feb 1, 2008
Sanding Disc Storage Box
WoodBoy!
Shop Overhaul
