|
SnarfyDog's photostream
|
|
2012-02-18 Amp Skillset 022
After cleaning the positive battery terminal, bolt on the power cable for the amplifier.
All rights reserved
Uploaded on Mar 3, 2012
2012-02-18 Amp Skillset 026
If the battery post cover doesn't snap back down, trim it so it will. This offers full protection.
All rights reserved
Uploaded on Mar 3, 2012
2012-02-18 Amp Skillset 027
Mount the fuse holder as close to the battery as possible. Make sure the Ground cable from the battery terminal to the chassis is sufficient.
All rights reserved
Uploaded on Mar 3, 2012
2012-02-18 Amp Skillset 030
Run wires from the engine bay into the vehicle through an existing grommet if possible.
All rights reserved
Uploaded on Mar 3, 2012
2012-02-18 Amp Skillset 033
Seal the entry point with strip caulk or silicone sealant.
All rights reserved
Uploaded on Mar 3, 2012
2012-02-18 Amp Skillset 050
When mounting the amp on the back of a fold down seat, tape off the area that is clear. This way when...
All rights reserved
Uploaded on Mar 3, 2012
2012-02-18 Amp Skillset 076
Pull back the seat cover if possible and make sure you are mounting the amp to metal.
All rights reserved
Uploaded on Mar 3, 2012
2012-02-18 Amp Skillset 083
2012-02-18 Amp Skillset 087
Ground amp to bare metal using a star washer and the shortest screw possible. I use 2 star washers. One...
All rights reserved
Uploaded on Mar 3, 2012
2012-02-18 Amp Skillset 100
Shared Photo Sets
Family
Friends
Spooner
Geocaching
Class of '87
Avrie & Bryan's...
Joleen & Lerrie's...
Concerts On The Green...
Concerts On The Green...
