new icn messageflickr-free-ic3d pan white
Fix required for Nanode RF Boards | by Ian Chilton
Back to photostream

Fix required for Nanode RF Boards

Testing has found a problem with the Nanode RF board. Initialising the ENC28J60 ethernet chip can cause the ATMega328 brown out and reset.

 

Adding an extra 10uF electrolytic capacitor between GND and Vcc fixes this.

 

If you have a Nanode RF PCB you should add an extra 10uF electrolytic capacitor in the space left for the ISP header. Long leg goes to pin 2, short leg to pin 6.

1,198 views
0 faves
0 comments
Taken on December 4, 2011