|
wellswebdesign_com's photostream |
|
Finished, in place, and being used!
Here is the finished product, performing its duties. Ignore the shelf in the far left of...
All rights reserved
Uploaded on Aug 12, 2007
Finished and in place
Attach the rest of the shelves to the legs, and move the finished shelving into place. Use a couple...
All rights reserved
Uploaded on Aug 12, 2007
Partially assembled shelves
The 4 legs are 2x4, also 8 feet. A ladder is necessary to access the upper 2 shelves, but it's not...
All rights reserved
Uploaded on Aug 12, 2007
5 of the 6 shelves, completed
Each shelf is 2 pieces of 2x3, 8 feet long each, and a 16x96 piece of 1/2" plywood. A single...
All rights reserved
Uploaded on Aug 12, 2007
Garage - Before
Garage storage... Always an issue. The manufactured shelving I've acquired over time never seems...
All rights reserved
Uploaded on Aug 12, 2007
Kitchen After - Ugly scalloped thing gone!
So I removed it! Biggest, nastiest nails I'd ever seen, holding it on. Crazy
All rights reserved
Uploaded on Jul 14, 2007
Kitchen Before - Ugly, old scalloped wood over sink
This is the original 1960's kitchen... I just couldn't get behind the scalloped plywood thing over the sink....
All rights reserved
Uploaded on Jul 14, 2007
Me, mowing my front lawn for the first time ever
The mower ran out of gas shortly after this picture was taken.
All rights reserved
Uploaded on Mar 29, 2007
New Porch Light
Porch light I got on clearance from The Great Indoors. Regular price: $44. Clearance price: $1.97.
All rights reserved
Uploaded on Mar 29, 2007
How it all started
This is the non-working Frogger cabinet I bought on Craigslist for $75. Stored in a garage for an...
All rights reserved
Uploaded on Feb 13, 2007
The monitor has been mounted
This is partway through the project, after I had stripped the cabinet completely, mounted casters...
All rights reserved
Uploaded on Feb 13, 2007
Cabinet In progress
This was near the end of the project, with the black poster board bezel in place.
All rights reserved
Uploaded on Feb 13, 2007
Coolest... power button... evar
I took one of the two original buttons from the Frogger control panel, Dremel'd a hole in a spare 5...
All rights reserved
Uploaded on Feb 13, 2007
X-Arcade control panel
The X-Arcade control panel fit amazingly well in the space from the old control panel. A scrap piece...
All rights reserved
Uploaded on Feb 13, 2007
Final Product
The "final product" of my MAME project. Many, many, many hours later, I'm extremely happy with how it turned out
All rights reserved
Uploaded on Feb 13, 2007
License Plate
Urban Frog
This frog was on our doorstep one night, scaring us in the low light. It hopped into the landscaping, where I took this low-light picture.
All rights reserved
Uploaded on Sep 30, 2006
Me on a mechanical bull
