Z80GameCoder's photostream

We miter cut small pieces of wood for the corners that we could screw into from the side studs....

Some rights reserved

Uploaded on May 3, 2011

1 comment

All eight walls are in place. Took just over two hours to complete. We are going to add extra...

Some rights reserved

Uploaded on May 3, 2011

0 comments

Half of the walls are up at this point. Pretty quick progress. The frames are plumbed and...

Some rights reserved

Uploaded on May 3, 2011

0 comments

Yesterday we cut to rough size the vinyl flooring and glued it in place. Then this morning I cut it to the correct size.

Some rights reserved

Uploaded on May 3, 2011

0 comments

Here's the stack of all eight wall frames for the gazebo style chicken coop. Thirty...

Some rights reserved

Uploaded on May 1, 2011

0 comments

We squared up and screwed in two 3.5" screws for each 81" stud on the sides.

Some rights reserved

Uploaded on May 1, 2011

0 comments

We put one 3.5" screw in to the three horizontal studs on both sides.

Some rights reserved

Uploaded on May 1, 2011

0 comments

We marked the middle of each of the middle studs and marked 15" in from each edge of the...

Some rights reserved

Uploaded on May 1, 2011

0 comments

The two end studs are 81". The top and bottom plates are 48" on the outside and about...

Some rights reserved

Uploaded on May 1, 2011

0 comments

We screwed one 3.5" screw in through the horizontal boards. Then we used another four...

Some rights reserved

Uploaded on May 1, 2011

0 comments

We pre-built these sections for all the walls. Now we are assembling them. The...

Some rights reserved

Uploaded on May 1, 2011

0 comments

We got half the framing for the walls done. We have the two center parts for all the rest...

Some rights reserved

Uploaded on Apr 30, 2011

0 comments

We built three of the window/vent frames so far. Another four to go. We set a window in between...

Some rights reserved

Uploaded on Apr 29, 2011

0 comments

After having built the first wall we decided to get all the wood cut for the rest of the wall frames.

Some rights reserved

Uploaded on Apr 29, 2011

0 comments

We built one wall to start. This was to see how best to put it all together. The walls...

Some rights reserved

Uploaded on Apr 29, 2011

0 comments

We positioned the floor pieces and screwed them all down on 16" centers, with a couple of...

Some rights reserved

Uploaded on Apr 23, 2011

0 comments

I finished painting all surfaces of the floor pieces, four coats of barn & fence paint....

Some rights reserved

Uploaded on Apr 21, 2011

0 comments

Spot the difference? Oops, we forgot to include joists under one edge of plywood. So we quickly...

Some rights reserved

Uploaded on Apr 17, 2011

0 comments