|
Nick Ames' photostream |
|
Korg Monotron Patch Sheet
I made a patch sheet for the Korg Monotron. Get it here: www.fetchmodus.org/projects/mono tron/index.html#patchsheet
Some rights reserved
Uploaded on Dec 28, 2011
Korg Monotron (Front)
Korg Monotron (Cover Removed)
Korg Monotron (PCB Back)
Korg Monotron (PCB Front)
Korg Monotron Filter Tracking Mod
The filter on my monotron didn't track the keyboard properly, causing low notes to have a different...
Some rights reserved
Uploaded on Dec 28, 2011
Pololu A4988 Stepper Driver Wiring Guide
This is a small paper template with the pinout of the Pololu A4988 stepper driver board. It makes wiring...
Some rights reserved
Uploaded on Dec 19, 2011
USB Stick (Capped)
This is a custom case I made for a USB stick/USB drive. (The original case was ugly and flimsy.)
Some rights reserved
Uploaded on Oct 23, 2011
USB Stick (Uncappped)
This is a custom case I made for a USB stick/USB drive. (The original case was ugly and flimsy.)
Some rights reserved
Uploaded on Oct 23, 2011
6 Penny Cube
Makerbot (2010)
My makerbot as it is today. The plywood walls around it are the sides of a homemade fume hood, which removes the fumes very effectively.
Some rights reserved
Uploaded on Dec 30, 2010
EggBot Makerbot Attachment (Complete)
This is a device that allows a Makerbot (or other cnc machine) to draw/print/cut on cylindrical or...
Some rights reserved
Uploaded on Dec 22, 2010
EggBot Makerbot Attachment (End Bracket)
This picture shows the dovetail and clamp system of the Eggbot Makerbot accessory. www.thingiverse.com/thing:5253
Some rights reserved
Uploaded on Dec 22, 2010
EggBot Makerbot Attachment (In Action)
This is a device that allows a Makerbot (or other cnc machine) to draw/print/cut on cylindrical or...
Some rights reserved
Uploaded on Dec 22, 2010
Mobile Robot
This is a small, two-wheeled robot I designed for pattywac's bearing design contest on thingiverse. It...
Some rights reserved
Uploaded on Oct 1, 2010
Mobile Robot: Rubber Band Tire
The penultimate step is to add tires to the wheels. The wheels have a small depression running around...
Some rights reserved
Uploaded on Oct 1, 2010
Mobile Robot: Caster
The robot needs casters to prevent the side from dragging on the ground. If you are using it on a hard...
Some rights reserved
Uploaded on Oct 1, 2010
Mobile Robot: Chassis Assembled
Once you have assembled both halves of the chassis, put them together and secure them with M3-16 bolts....
Some rights reserved
Uploaded on Oct 1, 2010
Korg Monotron
Mobile Robot
Skeinforge
AVR/Arduino
Prints
Radio
Vacuum Tubes
Electronic Components
Robots
Nixie Tubes
