|
pingdynasty's photostream |
|
Completed BlipBox
Touch screen and LEDs
Ready for final assembly, with the touchscreen and two LED matrices.
All rights reserved
Uploaded on Apr 7, 2009
Chips
The two IC's: AVR AtMega168 and TLC5940. Plus a couple of other bits that we forgot: headers and a 5k trimpot.
All rights reserved
Uploaded on Apr 7, 2009
USB Connector
Building a BlipBox
The BlipBox pcb, revision p4, with most of the components and tools required for assembly (including red wine).
All rights reserved
Uploaded on Apr 7, 2009
Solder side
Solder side with the IC sockets and smaller components soldered.
All rights reserved
Uploaded on Mar 27, 2009
BlipBox p4
This is the PCB with most of the components in place and the touch screen plugged in to the FFC connector.
All rights reserved
Uploaded on Mar 27, 2009
Jiffy bag of fun!
The PCB's for the BlipBox prototype have arrived! Also in the bag were some breakout boards for the FT232RL USB to TTL ic.
All rights reserved
Uploaded on Mar 27, 2009
FT232RL Breakout board
FT232RL board that will provide the prototype with a USB connection.
All rights reserved
Uploaded on Mar 27, 2009
Breadboard with voltage regulator
The adaptor in a breadboard with an LM317 voltage regulator at 3.3v
All rights reserved
Uploaded on Mar 13, 2009
LM400 with breadboard adaptor
This is a simple adaptor I made to fit the 6x2 pin header across the gap in a breadboard.
All rights reserved
Uploaded on Mar 13, 2009
LM400 Bluetooth module
The LM400 is a fullspeed Bluetooth 2.0 + EDR Class 1 device, with a handy 6x2 standard 0.1" header.
All rights reserved
Uploaded on Mar 13, 2009
Bluetooth Taquito
This is the taquito hooked up to the LM400 module and a battery, making it a bluetooth enabled MIDI...
All rights reserved
Uploaded on Mar 13, 2009
Polynome is alive!
The Polynome is a full colour, RGB monome clone. This is a breadboard prototype using Sparkfun...
All rights reserved
Uploaded on Jan 9, 2009
Building a BlipBox
BlipBox p4 PCB's
Polynome
Bluetooth Taquito
