|
fritz_da_kat's photostream
|
|
Voltage regulators
The old one, with the brushes worn out to 3mm is on the right.
All rights reserved
Uploaded on Nov 3, 2010
Driver's side engine mount bracket, with the mount removed.
There is very little space between the charcoal canister and the top nut of he motor mount.
All rights reserved
Uploaded on Sep 21, 2010
Engine support bracket with motor mount removed
Passenger's side motor mount
I wasn't able to get to the top nut of the motor mount with enough force to be able to remove it so I took off the whole engine support bracket.
All rights reserved
Uploaded on Sep 21, 2010
New vs. Old
Clean and shiny
I used a $2 scraper that came with 3 blades. Make sure you have more than one blade; the first blade broke before I finished the job.
All rights reserved
Uploaded on Sep 21, 2010
Remove the 25 10mm retaining bolts that hold the oil pan to the engine
Oil pan with gasket remnants.
Most of what was left of the gasket was a glassy, hard, thin and brittle substance that adhered to the engine block surface.
All rights reserved
Uploaded on Sep 21, 2010
Remove reverse Torx bolts
I did not have a 3/8" ratchet but the bits were 3/8" drive, so I had to use an adapter for...
All rights reserved
Uploaded on Sep 21, 2010
Fall and Winter 2010
Front Subframe and Oil Pan...
Cavern Diving
Summer 2010
Spring is in the air
Hawaii 2010
New Year 2010
Christmas 2009
Rear subframe bushings
Four months
» More Sets
