|
cglusky's photostream
|
|
CGL_2012-02-13_11-24-46
We ended up about 8" bigger span and bigger motor than the Mugi plans and it meant too much mass...
Some rights reserved
Uploaded on Feb 16, 2012
CGL_2012-02-12_17-00-18
This was not really meant for speed so we used a 300w 1400 kV outrunner with a 9x6 prop. Fast but not as...
Some rights reserved
Uploaded on Feb 16, 2012
CGL_2012-02-12_16-53-26
Ready for maiden. Or so we thought. I had not checked the CG since we had test fit the electronics. ...
Some rights reserved
Uploaded on Feb 16, 2012
CGL_2012-02-12_16-37-49
Motor mounted and taped up. Vertical fins were mounted with two bamboo skewers per. They were pushed...
Some rights reserved
Uploaded on Feb 16, 2012
CGL_2012-02-12_15-48-41
CGL_2012-02-12_15-45-27
Getting ready to fold over the top surface and glue/tape the trailing edges together.
Some rights reserved
Uploaded on Feb 16, 2012
CGL_2012-02-12_14-42-16
Cut outs for battery, ESC and receiver. Servos in front of CG but the control rods probably weighed more...
Some rights reserved
Uploaded on Feb 16, 2012
CGL_2012-02-12_13-49-08
Plywood motor mount for outrunner. bottom plate needed to be bigger with a doubler on the other (bottom)...
Some rights reserved
Uploaded on Feb 16, 2012
CGL_2012-02-12_13-29-53
Built up foam to provide a bit of an airfoil shape and room for electronics once folded. CF arrow cut to...
Some rights reserved
Uploaded on Feb 16, 2012
CGL_2012-02-11_21-08-42
An experiment to build a Mugi EVO based flying wing from foam poster board. Original Mugi plans here:...
Some rights reserved
Uploaded on Feb 16, 2012
Foam Mugi
Flying Thing
VFO
X24 Building Survey
X24 Bridge Survey
MCopter
Owl Cam
Gulf Coast Birds
Dauphin Island
Eagles In Motion
» More Sets
