|
Curt Walker's photostream |
|
NGC2244 - Rosette Nebula
The result of my first imaging session after modifying my 350D. This object was...
All rights reserved
Uploaded on Feb 4, 2008
Baader filter installed
Here is the rebuilt chip/filter assembly. The new filter is held in place with carefully applied...
All rights reserved
Uploaded on Jan 29, 2008
Baader IR/UV replacement filter
Stock filter removed from holder
A flexible silicon gasket secures the glass inside the plastic holder. The gasket can easily be cut...
All rights reserved
Uploaded on Jan 29, 2008
Disassembly of CMOS chip and filter
The filter holder is held in place above the CMOS chip with double-sided tape. It is very easy to...
All rights reserved
Uploaded on Jan 29, 2008
The chip/filter assembly
This piece will be disassembled into several individual parts. It will look just like this again after the filter is replaced.
All rights reserved
Uploaded on Jan 29, 2008
CMOS chip removed
The CMOS chip and filter come out as a single assembly. Five screws are all that is involved in this step.
All rights reserved
Uploaded on Jan 29, 2008
Top circuit board removed
After carefully disconnecting nine ribbon cables the circuit board is removed to reveal the back of the CMOS chip.
All rights reserved
Uploaded on Jan 29, 2008
Back cover removed
The procedure begins by removing numerous screws from the outside of the camera case. Two...
All rights reserved
Uploaded on Jan 29, 2008
