|
ivan98a's photostream |
|
StraitsTimes 2010Jul08 Page A12
car audio design (early 2010)
Access to G401 Ground Point: 2/2
G401 Ground Point is hidden behind one fat and one thin cables. G401 is a 10mm bolt.
All rights reserved
Uploaded on Jun 14, 2009
Access to G401 Ground Point: 1/2
Remove panels until the in-dash fuse box and its surroundings are easily accessible
All rights reserved
Uploaded on Jun 14, 2009
Access to Engine Bay: 1/3
Clutch Pedal
Clutch Pedal
Originally, the clutch pedal is stopped by a 17mm bolt and nut. Use a spanner and work on the bolt (not the nut!!) Takes some effort! Anti-clockwise
All rights reserved
Uploaded on Jun 14, 2009
PIN A
Two pins that potentially can be used in the ECM connector
All rights reserved
Uploaded on Jun 14, 2009
PIN B: 1/2
Pin that can be used in the connector of Clutch Pedal Position Switch
All rights reserved
Uploaded on Jun 14, 2009
Clutch Pedal Position Switch
Clutch Pedal Position Switch
Connector of Clutch Pedal Position Switch. When it is depressed, Pin 2 is shorted to Pin 1, and Pin 2 is shorted to Pin 3.
All rights reserved
Uploaded on Jun 14, 2009
PIN B: 2/2
Pin that can be used in the connector of Clutch Pedal Position Switch
All rights reserved
Uploaded on Jun 14, 2009
Misc
Variable Intermittent Wiper...
DIY Cruise Control
Grounding
Dash dismantle
Shift knob dismantle
